RS232 Single Channel Links
Specifications
| Optical Parameters @ Maximum Temp | Multimode | Single-Mode | | Optical Budget Typical | 19.5 dB | 19 dB | | Output power Typical | -10.5 dBm peak | -14.5 dBm peak | | Receiver Sensitivity Typical | -30 dBm peak | -33.4 dBm peak | | | (62.5µ/125 Multimode) | (9µ/125 Single-mode) | | Wavelength | 850nm | 1310nm | | Connector Type | ST | | Compatible Fiber Type | Multimode (50-200µm) | Single-Mode (9-13µm) | | Configuration (Switches) | DTE/DCE | | | AC/DC Coupled | | | Link/Repeat | | | Pin 8 Drive Current | | | Pin 6 +5 Vdc (DSR or CTS pull up) | | | Diagnostic Mode | | Data Rate | DC to 250K bps | | Data Transmission | Asynchronous, simplex or Full Duplex | | Transmission Distance | up to 5000 meters
(62.5µ/125 Cable@3dB/km) | up to 30K meters
(9µ/125 Cable@0.5dB/km) | | Bit Error Rate | 10-E9 Max. | | Point to Point Latency | 4 µsec Max | | Repeat Latency | 400 nsec Max | | Electrical Parameters | | Inputs | | I/O Data Format | EIA RS232; CCITT v24 | | Data Connector | 9 pin D-Type Female | | Input Impedance | >3000Ohms | | Input Voltage | +/- 30 Volts Max | | Outputs | | Output Impedance | >300 Ohms | | Driver Output | +/- 5 V min into 3000 Ohms | | Pin 8 Output | 0 to 5V
67 or 207 Ohm Source Impedance | | Ambient Temperature | | Operating Temperatures | -40 to +85 C | -40 to +70 C | | Storage Temperature | -40 to +85 C | | Power Required | | 5844 | 4.0 Watts | 5.5 Watts | | | 35 mA @ 90-250 V | 50 mA @ 90-250 V | | | 250 mA @ 18-60 V | 340 mA @ 18-60 V | | 5843 | 3.0 Watts | 4.1 Watts | | | 250mA @ 12Vdc | 340mA @ 12Vdc | | Power Dissipation BTU/H | | 5844 | 10.9 BTU | 12.3 BTU | | 5843 | 8.2 BTU | 10.2 BTU | | Physical Parameters | | Weight | | 5844 | 17 Ozs. | 17 Ozs. | | 5843 | 9 Ozs. | 9 Ozs. | | Dimensions Inches | | 5844 | 4.1W X 5.1L X 1.3H | | 5843 | 2.0W X 5.1L X 1.3H | | Indicators | Power | | | Transmit Fiber | | | Transmit Electrical | | | Receive Fiber | | | Receive Electrical | | Specifications Subject to Change Without Notice | |
