Dymec Ethernet Links Specifications:
| | 3340/3350 10 Base Ethernet | 3440/3450 100 Base Ethernet | Optical Paramters
@ Maximum Temp | Multimode | Single-Mode | Multimode | Single-Mode | | Optical Budget Minimum | 13.5 dB | 8.6 dB | 9.0 dB | 8.6 dB | | Output Power Minimum | -16 dBm peak | -19.9 dBm peak | -19 dBm peak | -19.9 dBm peak | | Receiver Sensitivity Minimum | -29.5 dBm peak | -28.5 dBm peak | -28 dBm peak | -28.5 dBm peak | | | (62.5µ/125 Multimode) | (9µ/125 Single-mode) | (62.5µ/125 Multimode) | (9µ/125 Single-mode) | | Wavelength | 850nm | 1310nm | 1300nm | 1310nm | | Connector Type | ST | | Compatible Fiber Type | Multimode (50-200µm) | Single-Mode (9-13µm) | Multimode (50-200µm) | Single-Mode (9-13µm) | | Configuration (Switches) | Link Pass-Through/Link Fail | | Data Rate | 10Mbs | 100Mbs | | Data Transmission | Half or Full Duplex | | Transmission Distance | up to 2000 meters | up to 10K meters | up to 2000 meters | up to 10K meters | | | (62.5µ/125 Cable
@3dB/km) | (9µ/125 Cable
@0.5dB/km) | (62.5µ/125 Cable
@3dB/km) | (9µ/125 Cable
@0.5dB/km) | | Bit Error Rate | 10-E9 Max. | | Point to Point Latency | 100 nsec | | Electrical Parameters | | | Inputs | | | I/O Data Format | 802.3 Ethernet | 802.3 Ethernet | | Data Connector | 2 RJ45 | 2 RJ45 | | Ambient Temperature | | | Operating Temperatures | -40 to +85 C | -40 to +70 C | -40 to +85 C | -40 to +70 C | | Storage Temperature | -40 to +85 C | | Power Required | | | 3X50 | 5.4 Watts | | | 60 mA @ 90-250 V | | | 300 mA @ 18-60 V | | 3X40 | 4.0 Watts | | | 333 mA @ 12Vdc | | Power Dissipation BTU/H | | | 3X50 | 18.4 BTU | | 3X40 | 13.7 BTU | | Physical Parameters | | | Weight | | | 3X50 | 17 Ozs. | | 3X40 | 9 Ozs. | | Dimension Inches | | | 3X50 | 4.1W X 5.1L X 1.3H | | 3X40 | 2.0W X 5.1L X 1.3H | | Indicators | Power | | | Fiber Link | | | Electrical Link | | | Fiber Data | | | Electrical Data | |
Specifications Subject to Change Without Notice |
|
